• Welcome to IMS - Enter Serial # with dashes ( - ).  Enter Name.
• System Configuration - Continue with Configuration.
• Keyboard Nationality
• Session Switching - Use Default.
• System Options -
• Print Spooler Enabled = Yes/No
• Modem: ATE0Q1&C1&D2S0=2
• Auxiliary Input Buffer = 512
• Multigraphics - Memory Buffers = 4* Disk Buffers = 4* (multiply 4 X Number of Graphics Users)
• Phantom DOS Sessions = 0
• Parallel Printer Poll = 500 ms
• Enable Debug = Yes
• Advanced Features 1-8 = No
• Memory -
• Maximum Memory = 720
• All Upper Memory set to Autoscan = Yes
• Use B100-B7FF = Yes/No
• LIM Emulation Enabled = Yes/No - If Yes Page Frame Address = TPA
• DPMI Support Enabled = Yes/No - If Yes Use Screen Defaults
• Memory Options = Defaults
• DOS Session Defaults = 6.20 (Required for Disks Larger than 500 MB)
• Foreground & Background Processes = Defaults
• Disk & File System -
• Disk Buffers = 64
• VDISK = Yes/No
• Hard Disk Cache = No (Experiment with this Later)
• Fast Open = Yes/No If - Yes (4096 is a generally adequate)
• File System Settings -
• Open Files Per Process = 200
• Total Open Files = 1360
• Locked Records = 64
• Lastdrive = P:
• Netdrive = On
• Multitasking Optimize = Yes
• Hard Disk BIOS Fix = No
• Hard Disk Timeout = 4
• Stations & Multiports -
• Main Console - (Host Server Station 0) VGA Station = Station 0
• Configuration of Station 0
• Number of Sessions = 4
• Status Line = Yes
• Keyboard = 102
• PS/2 or Bus Mouse = Yes/No
• LPT1 Printer = PRN0   -   LPT2 Printer = PRN1   -   LPT3 Printer = PRN2
• COM1 Serial Port = Auxillary or Mouse
• COM2 Serial Port = Auxillary (for Modem) Baud Rate = 57600, None, 8,1
• Protocol - Transmit XON = No, DSR = No, CTS = Yes
• Protocol - Receive XON = No, DTR, = No, RTS = Yes
• Security Setup a Secure System without Disk Security
• Reboot - When asked Load REAL/32 (Y or N) Y

These settings should get you started and are only suggestions as to the quickest way to get going on your REAL/32 Multiuser, Pre-emptive Multitasking, Real Time Operating System.

To install the MaxFrame Zero Administration Package, reboot your system into REAL/32 and login as Superuser.  Place your MaxFrame Disk 1 in your 3.5" Floppy Drive.  At a System Prompt change to your Floppy Drive, A: or B:. and type INSTALL. The Installation is self-explanatory and simply hitting the enter key will provide the best suggested choices. When finished, it will reboot the PC for you, and it is set to use.